ระดับ D· รากฐานทางวิทยาศาสตร์จากห้องปฏิบัติการและสัตว์ทดลองการศึกษาในห้องปฏิบัติการEurope PMCเข้าถึงฉบับเต็มได้ฟรี

3D-printed polyether-ether-ketone/n-TiO 2 composite enhances the cytocompatibility and osteogenic differentiation of MC3T3-E1 cells by downregulating miR-154-5p

Li Z., Li Y., Xu W., Yu J., Tong S., Zhang X.

การศึกษาในห้องปฏิบัติการ เกี่ยวกับ ใบหน้าและผิว ตีพิมพ์ในวารสาร Open Med (Wars) ปี 2023 — สรุปอัตโนมัติจากบทคัดย่อ PubMed

เปิดรายการอ่านของฉัน
ระดับ D· รากฐานทางวิทยาศาสตร์จากห้องปฏิบัติการและสัตว์ทดลองระดับหลักฐานของงานวิจัยนี้

หลักฐานจากการศึกษาในห้องปฏิบัติการและสัตว์ทดลอง เป็นรากฐานที่ช่วยให้เข้าใจกลไกและศักยภาพก่อนการศึกษาในมนุษย์ต่อไป

  • ระดับ A · หลักฐานทางคลินิกค่อนข้างแข็งแรง
  • ระดับ B · หลักฐานทางคลินิกที่กำลังเติบโตและมีสัญญาณเชิงบวก
  • ระดับ C · งานวิจัยในมนุษย์ระยะต้นที่กำลังสำรวจประโยชน์
  • ระดับ D · รากฐานทางวิทยาศาสตร์จากห้องปฏิบัติการและสัตว์ทดลอง
  • กำลังศึกษาเพิ่มเติม · หัวข้อใหม่ที่นักวิจัยกำลังสำรวจอย่างต่อเนื่อง
อ่านคำอธิบายระดับหลักฐาน A–D

ข้อมูลหน้านี้ดึงมาจากฐานข้อมูล PubMed โดยตรง คำอธิบายภาษาไทยเป็นสรุปอัตโนมัติจากข้อมูลบรรณานุกรมและบทคัดย่อ ไม่ใช่การแปลทั้งฉบับ และไม่ใช่คำแนะนำทางการแพทย์

ประเภทการศึกษา
การศึกษาในห้องปฏิบัติการ
วารสาร
Open Med (Wars) (2023)
จำนวนผู้เข้าร่วม (จากบทคัดย่อ)
—
แหล่งข้อมูล
Europe PMC
PMID
36760721
PMCID
PMC9885016
DOI
10.1515/med-2023-0636

บทคัดย่อ (ต้นฉบับภาษาอังกฤษ)

The object was to enhance the bioactivity of pure polyether-ether-ketone (PEEK) by incorporating nano-TiO 2 (n-TiO 2 ) and investigate its potential mechanism. PEEK/n-TiO 2 composite was manufactured using a 3D PEEK printer and characterized by scanning electron microscopy (SEM), 3D profiler, energy-dispersive spectroscopy, and Fourier-transform infrared (FT-IR) analyses. Cytocompatibility was tested using SEM, fluorescence, and cell counting kit-8 assays. Osteogenic differentiation was evaluated by osteogenic gene and mineralized nodule levels. The expression of the candidate miRNAs were detected in composite group, and its role in osteogenic differentiation was studied. As a results the 3D-printed PEEK/n-TiO 2 composite ( Φ = 25 mm, H = 2 mm) was successfully fabricated, and the TiO 2 nanoparticles were well distributed and retained the nanoscale size of the powder. The Ra value of the composite surface was 2.69 ± 0.29, and Ti accounted for 22.29 ± 12.09% (in weight), and FT-IR analysis confirmed the characteristic peaks of TiO 2 . The cells in the composite group possessed better proliferation and osteogenic differentiation abilities than those in the PEEK group. miR-154-5p expression was decreased in the composite group, and the inhibition of miR-154-5p significantly enhanced the proliferation and osteogenic differentiation abilities. In conclusion, 3D-printed PEEK/n-TiO 2

สิ่งที่งานวิจัยนี้ไม่ได้พิสูจน์

  • • งานวิจัยนี้ไม่ได้พิสูจน์ว่า SVF เป็นการรักษาที่ได้รับการรับรอง หรือใช้แทนการรักษามาตรฐานได้
  • • เป็นการศึกษาก่อนคลินิก ผลในสัตว์ทดลองหรือห้องปฏิบัติการไม่สามารถนำมาสรุปผลในมนุษย์ได้

ระดับหลักฐาน

หลักฐานจากการศึกษาในห้องปฏิบัติการและสัตว์ทดลอง เป็นรากฐานที่ช่วยให้เข้าใจกลไกและศักยภาพก่อนการศึกษาในมนุษย์ต่อไป

ดูวิธีจัดระดับหลักฐาน

ดูงานวิจัยทั้งหมดที่เกี่ยวข้อง

กรองห้องสมุดงานวิจัยด้วยชื่อเรื่อง ชื่อผู้เขียน หรือปีที่ตีพิมพ์ของงานวิจัยนี้

งานวิจัยที่เกี่ยวข้อง