ระดับ D· รากฐานทางวิทยาศาสตร์จากห้องปฏิบัติการและสัตว์ทดลองการศึกษาในสัตว์ทดลองPubMedเข้าถึงฉบับเต็มได้ฟรี

Bio-3D printing of scaffold-free ADSC-derived cartilage constructs comparable to natural cartilage in vitro.

Nonaka T., Murata D., Yoshizato H., Kashimoto S., Nakamura A., Morimoto T.

การศึกษาในสัตว์ทดลอง ในกลุ่มตัวอย่าง 12 ราย เกี่ยวกับ ข้อเสื่อม (ทั่วไป), กระดูกอ่อนบาดเจ็บ ตีพิมพ์ในวารสาร J Orthop Surg Res ปี 2025 — สรุปอัตโนมัติจากบทคัดย่อ PubMed

เปิดรายการอ่านของฉัน
ระดับ D· รากฐานทางวิทยาศาสตร์จากห้องปฏิบัติการและสัตว์ทดลองระดับหลักฐานของงานวิจัยนี้

หลักฐานจากการศึกษาในห้องปฏิบัติการและสัตว์ทดลอง เป็นรากฐานที่ช่วยให้เข้าใจกลไกและศักยภาพก่อนการศึกษาในมนุษย์ต่อไป

  • ระดับ A · หลักฐานทางคลินิกค่อนข้างแข็งแรง
  • ระดับ B · หลักฐานทางคลินิกที่กำลังเติบโตและมีสัญญาณเชิงบวก
  • ระดับ C · งานวิจัยในมนุษย์ระยะต้นที่กำลังสำรวจประโยชน์
  • ระดับ D · รากฐานทางวิทยาศาสตร์จากห้องปฏิบัติการและสัตว์ทดลอง
  • กำลังศึกษาเพิ่มเติม · หัวข้อใหม่ที่นักวิจัยกำลังสำรวจอย่างต่อเนื่อง
อ่านคำอธิบายระดับหลักฐาน A–D

ข้อมูลหน้านี้ดึงมาจากฐานข้อมูล PubMed โดยตรง คำอธิบายภาษาไทยเป็นสรุปอัตโนมัติจากข้อมูลบรรณานุกรมและบทคัดย่อ ไม่ใช่การแปลทั้งฉบับ และไม่ใช่คำแนะนำทางการแพทย์

ประเภทการศึกษา
การศึกษาในสัตว์ทดลอง
วารสาร
J Orthop Surg Res (2025)
ประเทศ
England
จำนวนผู้เข้าร่วม (จากบทคัดย่อ)
12
แหล่งข้อมูล
PubMed
PMID
39979971
PMCID
PMC11844123
DOI
10.1186/s13018-025-05604-7
จำนวนการอ้างอิง
10

บทคัดย่อ (ต้นฉบับภาษาอังกฤษ)

Background In end-stage osteoarthritis (OA), osteochondral defects reach the subchondral bone and cartilage tissue of sufficient thickness is required to compensate for the defects. Adipose-derived mesenchymal stem/stromal cells (ADSCs), which are abundant in the body, have the potential to differentiate into cartilage and may be a useful cell source for cartilage regeneration. If it is possible to fabricate ADSC-derived cartilage constructs that can cover the damaged area, this could lead to the development of a new regenerative therapy for OA that could replace the currently available treatments. We therefore sought to produce cartilage constructs with suitable thickness and biological properties, similar to native cartilage, using the bio-three-dimensional (3D) printer. We also investigated the culture protocol to ensure that the constructs were fully mature even at the internal site. Methods ADSCs were isolated from three rats and expanded to create cartilage spheroids. The spheroids were arranged into patches using a Kenzan bio-3D printer to create scaffold-free, cell-only cartilage constructs. Basic fibroblast growth factor (bFGF) was added during expansion culture and varying concentrations of bone morphogenetic protein2 (BMP2) were supplemented during chondrogenic differentiation. The levels of glycosaminoglycans (GAG) in the spheroids and constructs were measured. The

สิ่งที่งานวิจัยนี้ไม่ได้พิสูจน์

  • • งานวิจัยนี้ไม่ได้พิสูจน์ว่า SVF เป็นการรักษาที่ได้รับการรับรอง หรือใช้แทนการรักษามาตรฐานได้
  • • เป็นการศึกษาก่อนคลินิก ผลในสัตว์ทดลองหรือห้องปฏิบัติการไม่สามารถนำมาสรุปผลในมนุษย์ได้

ระดับหลักฐาน

หลักฐานจากการศึกษาในห้องปฏิบัติการและสัตว์ทดลอง เป็นรากฐานที่ช่วยให้เข้าใจกลไกและศักยภาพก่อนการศึกษาในมนุษย์ต่อไป

ดูวิธีจัดระดับหลักฐาน
Printing, Three-DimensionalAnimalsMesenchymal Stem CellsRatsTissue EngineeringTissue ScaffoldsCartilage, ArticularChondrogenesisCells, CulturedAdipose Tissue

ดูงานวิจัยทั้งหมดที่เกี่ยวข้อง

กรองห้องสมุดงานวิจัยด้วยชื่อเรื่อง ชื่อผู้เขียน หรือปีที่ตีพิมพ์ของงานวิจัยนี้

งานวิจัยที่เกี่ยวข้อง