ระดับ D· รากฐานทางวิทยาศาสตร์จากห้องปฏิบัติการและสัตว์ทดลองบทความปริทัศน์PubMed

Bioengineered Approach to the Design of a Fat Graft Based on Mathematical Modeling that Predicts Oxygen Delivery.

Suszynski TM., Rohrich RJ., Sieber DA., Boyd TG., Thornton JF., Teotia SS.

บทความปริทัศน์ เกี่ยวกับ ใบหน้าและผิว ตีพิมพ์ในวารสาร Plast Reconstr Surg ปี 2019 — สรุปอัตโนมัติจากบทคัดย่อ PubMed

เปิดรายการอ่านของฉัน
ระดับ D· รากฐานทางวิทยาศาสตร์จากห้องปฏิบัติการและสัตว์ทดลองระดับหลักฐานของงานวิจัยนี้

หลักฐานจากการศึกษาในห้องปฏิบัติการและสัตว์ทดลอง เป็นรากฐานที่ช่วยให้เข้าใจกลไกและศักยภาพก่อนการศึกษาในมนุษย์ต่อไป

  • ระดับ A · หลักฐานทางคลินิกค่อนข้างแข็งแรง
  • ระดับ B · หลักฐานทางคลินิกที่กำลังเติบโตและมีสัญญาณเชิงบวก
  • ระดับ C · งานวิจัยในมนุษย์ระยะต้นที่กำลังสำรวจประโยชน์
  • ระดับ D · รากฐานทางวิทยาศาสตร์จากห้องปฏิบัติการและสัตว์ทดลอง
  • กำลังศึกษาเพิ่มเติม · หัวข้อใหม่ที่นักวิจัยกำลังสำรวจอย่างต่อเนื่อง
อ่านคำอธิบายระดับหลักฐาน A–D

ข้อมูลหน้านี้ดึงมาจากฐานข้อมูล PubMed โดยตรง คำอธิบายภาษาไทยเป็นสรุปอัตโนมัติจากข้อมูลบรรณานุกรมและบทคัดย่อ ไม่ใช่การแปลทั้งฉบับ และไม่ใช่คำแนะนำทางการแพทย์

ประเภทการศึกษา
บทความปริทัศน์
วารสาร
Plast Reconstr Surg (2019)
ประเทศ
United States
จำนวนผู้เข้าร่วม (จากบทคัดย่อ)
—
แหล่งข้อมูล
PubMed
PMID
30907806
DOI
10.1097/PRS.0000000000005626

บทคัดย่อ (ต้นฉบับภาษาอังกฤษ)

Fat grafting is a common procedure in plastic surgery. A major limitation is unpredictable graft retention, in part caused by inadequate oxygen delivery during the early posttransfer period. The authors present a bioengineered approach to the design of a fat graft based on mathematical theory, which can estimate the limitations of oxygen delivery. To simplify the problem, four variables were defined: (1) recipient-site oxygen partial pressure; (2) adipose tissue oxygen permeability; (3) adipose tissue oxygen consumption rate; and (4) fat graft size. Recipient-site oxygen partial pressure and adipose tissue oxygen permeability were estimated from literature, whereas adipose tissue oxygen consumption rate was measured using stirred microchamber technology. Calculations were performed in both spherical and planar geometry to calculate the maximum allowable fat graft size from an oxygen delivery standpoint. As expected, planar geometry is less favorable for oxygenation but represents a realistic configuration for a fat graft. Maximum allowable fat graft thickness is only approximately 1 to 2 mm at external oxygen partial pressures of 10 to 40 mm Hg; any thicker and an anoxic or necrotic core likely develops. Given a reasonably large surface area and assuming several planes of injection, the maximum allowable fat graft volume is tens of milliliters. A systematic bioengineered approa

สิ่งที่งานวิจัยนี้ไม่ได้พิสูจน์

  • • งานวิจัยนี้ไม่ได้พิสูจน์ว่า SVF เป็นการรักษาที่ได้รับการรับรอง หรือใช้แทนการรักษามาตรฐานได้
  • • เป็นบทความปริทัศน์ ไม่ได้เก็บข้อมูลผู้ป่วยใหม่ และไม่ได้ประเมินคุณภาพหลักฐานอย่างเป็นระบบ

ระดับหลักฐาน

หลักฐานจากการศึกษาในห้องปฏิบัติการและสัตว์ทดลอง เป็นรากฐานที่ช่วยให้เข้าใจกลไกและศักยภาพก่อนการศึกษาในมนุษย์ต่อไป

ดูวิธีจัดระดับหลักฐาน
Adipose TissueBioengineeringGraft SurvivalHumansModels, TheoreticalOxygen ConsumptionPredictive Value of TestsSurgery, PlasticTissue TransplantationTissue and Organ Harvesting

ดูงานวิจัยทั้งหมดที่เกี่ยวข้อง

กรองห้องสมุดงานวิจัยด้วยชื่อเรื่อง ชื่อผู้เขียน หรือปีที่ตีพิมพ์ของงานวิจัยนี้

งานวิจัยที่เกี่ยวข้อง