ระดับ D· รากฐานทางวิทยาศาสตร์จากห้องปฏิบัติการและสัตว์ทดลองการศึกษาในสัตว์ทดลองPubMed

Design and development of vaginal wall mimicking poly( ϵ -caprolactone) based nanofibrous prosthetic mesh for pelvic organ prolapse: evaluation of biocompatibility and antibacterial ability.

Arul Murugan P., Bellare J.

การศึกษาในสัตว์ทดลอง ตีพิมพ์ในวารสาร Biomed Mater ปี 2025 — สรุปอัตโนมัติจากบทคัดย่อ PubMed

เปิดรายการอ่านของฉัน
ระดับ D· รากฐานทางวิทยาศาสตร์จากห้องปฏิบัติการและสัตว์ทดลองระดับหลักฐานของงานวิจัยนี้

หลักฐานจากการศึกษาในห้องปฏิบัติการและสัตว์ทดลอง เป็นรากฐานที่ช่วยให้เข้าใจกลไกและศักยภาพก่อนการศึกษาในมนุษย์ต่อไป

  • ระดับ A · หลักฐานทางคลินิกค่อนข้างแข็งแรง
  • ระดับ B · หลักฐานทางคลินิกที่กำลังเติบโตและมีสัญญาณเชิงบวก
  • ระดับ C · งานวิจัยในมนุษย์ระยะต้นที่กำลังสำรวจประโยชน์
  • ระดับ D · รากฐานทางวิทยาศาสตร์จากห้องปฏิบัติการและสัตว์ทดลอง
  • กำลังศึกษาเพิ่มเติม · หัวข้อใหม่ที่นักวิจัยกำลังสำรวจอย่างต่อเนื่อง
อ่านคำอธิบายระดับหลักฐาน A–D

ข้อมูลหน้านี้ดึงมาจากฐานข้อมูล PubMed โดยตรง คำอธิบายภาษาไทยเป็นสรุปอัตโนมัติจากข้อมูลบรรณานุกรมและบทคัดย่อ ไม่ใช่การแปลทั้งฉบับ และไม่ใช่คำแนะนำทางการแพทย์

ประเภทการศึกษา
การศึกษาในสัตว์ทดลอง
วารสาร
Biomed Mater (2025)
ประเทศ
England
จำนวนผู้เข้าร่วม (จากบทคัดย่อ)
—
แหล่งข้อมูล
PubMed
PMID
39715589
DOI
10.1088/1748-605X/ada2d0

บทคัดย่อ (ต้นฉบับภาษาอังกฤษ)

Mechanical non-conformance of conventionally used transvaginal non-degradable meshes has led to complications such as organ perforation, dyspareunia caused by mesh stiffness and stress shielding. In this study, we have solved the dire need to mimic the mechanical properties of the vaginal wall by designing and developing a soft and elastic mesh made of polycaprolactone (PCL), citric acid modified polyethylene glycol (PEGC) and zinc oxide (ZnO) prepared through electrospinning and tested in vitro and in vivo . The mesh containing 90:10:0.1 of PCL, PEGC and ZnO (PEGC-15 0.1ZnO mesh) conforms to the mechanical properties of the vaginal wall of the pelvic floor, has a burst strength of ∼35 N even after gamma-sterilization and 28 d of degradation in in vitro . In vitro studies using adipose-derived stem cells revealed that the PCL-PEGC-15 0.1ZnO meshes were biocompatible and supported higher collagen production than commercial mesh. An in vitro bacterial adhesion study showed a 2-log reduction compared to commercially available mesh for prolapse treatment. Initial biocompatibility assessment in a rabbit model also showed that the PCL-PEGC-15 0.1ZnO mesh is biocompatible and supports fibrosis throughout the mesh. The softness and flexibility of the PCL-PEGC-15 0.1ZnO mesh based on in vitro trials and initial in vivo trials show that the mesh has a potential clinical impact for pelvic

สิ่งที่งานวิจัยนี้ไม่ได้พิสูจน์

  • • งานวิจัยนี้ไม่ได้พิสูจน์ว่า SVF เป็นการรักษาที่ได้รับการรับรอง หรือใช้แทนการรักษามาตรฐานได้
  • • เป็นการศึกษาก่อนคลินิก ผลในสัตว์ทดลองหรือห้องปฏิบัติการไม่สามารถนำมาสรุปผลในมนุษย์ได้

ระดับหลักฐาน

หลักฐานจากการศึกษาในห้องปฏิบัติการและสัตว์ทดลอง เป็นรากฐานที่ช่วยให้เข้าใจกลไกและศักยภาพก่อนการศึกษาในมนุษย์ต่อไป

ดูวิธีจัดระดับหลักฐาน
PolyestersAnimalsPelvic Organ ProlapseFemaleSurgical MeshBiocompatible MaterialsMaterials TestingNanofibersAnti-Bacterial AgentsRabbits

ดูงานวิจัยทั้งหมดที่เกี่ยวข้อง

กรองห้องสมุดงานวิจัยด้วยชื่อเรื่อง ชื่อผู้เขียน หรือปีที่ตีพิมพ์ของงานวิจัยนี้