ระดับ D· รากฐานทางวิทยาศาสตร์จากห้องปฏิบัติการและสัตว์ทดลองการศึกษาในห้องปฏิบัติการPubMedเข้าถึงฉบับเต็มได้ฟรี

Evaluation of triply periodic minimal surface geometries in 3D-printed PLA scaffolds for chondrogenic differentiation.

Kılıç MA., Akyürek M., Abidnejad R., Karakoç A.

การศึกษาในห้องปฏิบัติการ เกี่ยวกับ ใบหน้าและผิว ตีพิมพ์ในวารสาร Biotechnol Prog ปี 2025 — สรุปอัตโนมัติจากบทคัดย่อ PubMed

เปิดรายการอ่านของฉัน
ระดับ D· รากฐานทางวิทยาศาสตร์จากห้องปฏิบัติการและสัตว์ทดลองระดับหลักฐานของงานวิจัยนี้

หลักฐานจากการศึกษาในห้องปฏิบัติการและสัตว์ทดลอง เป็นรากฐานที่ช่วยให้เข้าใจกลไกและศักยภาพก่อนการศึกษาในมนุษย์ต่อไป

  • ระดับ A · หลักฐานทางคลินิกค่อนข้างแข็งแรง
  • ระดับ B · หลักฐานทางคลินิกที่กำลังเติบโตและมีสัญญาณเชิงบวก
  • ระดับ C · งานวิจัยในมนุษย์ระยะต้นที่กำลังสำรวจประโยชน์
  • ระดับ D · รากฐานทางวิทยาศาสตร์จากห้องปฏิบัติการและสัตว์ทดลอง
  • กำลังศึกษาเพิ่มเติม · หัวข้อใหม่ที่นักวิจัยกำลังสำรวจอย่างต่อเนื่อง
อ่านคำอธิบายระดับหลักฐาน A–D

ข้อมูลหน้านี้ดึงมาจากฐานข้อมูล PubMed โดยตรง คำอธิบายภาษาไทยเป็นสรุปอัตโนมัติจากข้อมูลบรรณานุกรมและบทคัดย่อ ไม่ใช่การแปลทั้งฉบับ และไม่ใช่คำแนะนำทางการแพทย์

ประเภทการศึกษา
การศึกษาในห้องปฏิบัติการ
วารสาร
Biotechnol Prog (2025)
ประเทศ
United States
จำนวนผู้เข้าร่วม (จากบทคัดย่อ)
—
แหล่งข้อมูล
PubMed
PMID
40787904
PMCID
PMC12696442
DOI
10.1002/btpr.70062
จำนวนการอ้างอิง
2

บทคัดย่อ (ต้นฉบับภาษาอังกฤษ)

Triply periodic minimal surface (TPMS) scaffolds are gaining attention in tissue engineering due to their continuous and interconnected porous architecture. In this study, three TPMS geometries-Gyroid, Diamond, and I-WP-were fabricated from polylactic acid (PLA) using fused deposition modeling (FDM), with all scaffolds designed to maintain the same overall porosity. Scaffold characterization included scanning electron microscopy (SEM), microcomputed tomography (micro-CT), compressive mechanical testing, and surface wettability analysis. Although porosity was constant, differences in Equivalent Circular Diameter (ECD) values were observed among the geometries, reflecting variations in pore morphology. Adipose-derived stem cells (ADSCs) were seeded onto the scaffolds and cultured under chondrogenic differentiation conditions for 21 days. Cell viability, gene expression (Col2, Col10, Sox9), and protein levels were assessed using RT-PCR and Western blot. All scaffold geometries supported cell attachment and chondrogenic differentiation to varying degrees. The Diamond geometry showed the highest chondrogenic marker expression at the mRNA level, while the Gyroid geometry promoted more stable protein expression with reduced hypertrophic signaling. These findings demonstrate that scaffold geometry, even under identical material and porosity conditions, can influence stem cell behavior.

สิ่งที่งานวิจัยนี้ไม่ได้พิสูจน์

  • • งานวิจัยนี้ไม่ได้พิสูจน์ว่า SVF เป็นการรักษาที่ได้รับการรับรอง หรือใช้แทนการรักษามาตรฐานได้
  • • เป็นการศึกษาก่อนคลินิก ผลในสัตว์ทดลองหรือห้องปฏิบัติการไม่สามารถนำมาสรุปผลในมนุษย์ได้

ระดับหลักฐาน

หลักฐานจากการศึกษาในห้องปฏิบัติการและสัตว์ทดลอง เป็นรากฐานที่ช่วยให้เข้าใจกลไกและศักยภาพก่อนการศึกษาในมนุษย์ต่อไป

ดูวิธีจัดระดับหลักฐาน
PolyestersTissue ScaffoldsPrinting, Three-DimensionalCell DifferentiationChondrogenesisTissue EngineeringPorosityStem CellsSurface PropertiesCells, Cultured

ดูงานวิจัยทั้งหมดที่เกี่ยวข้อง

กรองห้องสมุดงานวิจัยด้วยชื่อเรื่อง ชื่อผู้เขียน หรือปีที่ตีพิมพ์ของงานวิจัยนี้

งานวิจัยที่เกี่ยวข้อง