ระดับ D· รากฐานทางวิทยาศาสตร์จากห้องปฏิบัติการและสัตว์ทดลองการศึกษาในห้องปฏิบัติการPubMed

The impact of green and organic solvent-based lignin fractionation on polylactic acid biomaterial properties and biocompatibility.

Chailee O., Cardarelli A., Barbanera M., Fabbrizi G., Lucariello M., Nicolini A.

การศึกษาในห้องปฏิบัติการ เกี่ยวกับ ใบหน้าและผิว ตีพิมพ์ในวารสาร Int J Biol Macromol ปี 2025 — สรุปอัตโนมัติจากบทคัดย่อ PubMed

เปิดรายการอ่านของฉัน
ระดับ D· รากฐานทางวิทยาศาสตร์จากห้องปฏิบัติการและสัตว์ทดลองระดับหลักฐานของงานวิจัยนี้

หลักฐานจากการศึกษาในห้องปฏิบัติการและสัตว์ทดลอง เป็นรากฐานที่ช่วยให้เข้าใจกลไกและศักยภาพก่อนการศึกษาในมนุษย์ต่อไป

  • ระดับ A · หลักฐานทางคลินิกค่อนข้างแข็งแรง
  • ระดับ B · หลักฐานทางคลินิกที่กำลังเติบโตและมีสัญญาณเชิงบวก
  • ระดับ C · งานวิจัยในมนุษย์ระยะต้นที่กำลังสำรวจประโยชน์
  • ระดับ D · รากฐานทางวิทยาศาสตร์จากห้องปฏิบัติการและสัตว์ทดลอง
  • กำลังศึกษาเพิ่มเติม · หัวข้อใหม่ที่นักวิจัยกำลังสำรวจอย่างต่อเนื่อง
อ่านคำอธิบายระดับหลักฐาน A–D

ข้อมูลหน้านี้ดึงมาจากฐานข้อมูล PubMed โดยตรง คำอธิบายภาษาไทยเป็นสรุปอัตโนมัติจากข้อมูลบรรณานุกรมและบทคัดย่อ ไม่ใช่การแปลทั้งฉบับ และไม่ใช่คำแนะนำทางการแพทย์

ประเภทการศึกษา
การศึกษาในห้องปฏิบัติการ
วารสาร
Int J Biol Macromol (2025)
ประเทศ
Netherlands
จำนวนผู้เข้าร่วม (จากบทคัดย่อ)
—
แหล่งข้อมูล
PubMed
PMID
41038486
DOI
10.1016/j.ijbiomac.2025.148025

บทคัดย่อ (ต้นฉบับภาษาอังกฤษ)

Biomass (cardoon)-derived lignin was fractionated using three solvents, gamma-valerolactone (GVL), acetone, and ethanol (EtOH), and incorporated into polylactic acid (PLA) with 1, 3, and 5 wt% of lignin developing biocomposites via solvent casting. The organosolv fractionation and lignin extraction process enabled the selective separation of lignin, with the choice of solvent significantly influencing lignin particle morphology. Scanning electron microscopy revealed GVL promoted particle nucleation through gradual coalescence, acetone led to rapid solidification with a mixture of large and small particles, and EtOH induced rapid supersaturation, forming smaller, irregular particles. Infrared spectroscopy confirmed lignin incorporation into PLA matrix, with variations in hydroxyl and carbonyl group intensities reflecting interfacial interactions. Thermogravimetric analysis indicated low lignin loading was most effective in enhancing the thermal stability of PLA composites containing GVL and acetone fractionated lignin. In contrast, composites with EtOH fractionated lignin exhibited the best thermal performance at higher percentage. Biological evaluations using human adipose-derived stem cells confirmed excellent cytocompatibility over 14 days. Notably, lignin fractionated with EtOH demonstrated the highest protein adsorption, suggesting enhanced cell-material interaction potenti

สิ่งที่งานวิจัยนี้ไม่ได้พิสูจน์

  • • งานวิจัยนี้ไม่ได้พิสูจน์ว่า SVF เป็นการรักษาที่ได้รับการรับรอง หรือใช้แทนการรักษามาตรฐานได้
  • • เป็นการศึกษาก่อนคลินิก ผลในสัตว์ทดลองหรือห้องปฏิบัติการไม่สามารถนำมาสรุปผลในมนุษย์ได้

ระดับหลักฐาน

หลักฐานจากการศึกษาในห้องปฏิบัติการและสัตว์ทดลอง เป็นรากฐานที่ช่วยให้เข้าใจกลไกและศักยภาพก่อนการศึกษาในมนุษย์ต่อไป

ดูวิธีจัดระดับหลักฐาน
PolyestersLigninSolventsBiocompatible MaterialsHumansChemical FractionationGreen Chemistry TechnologyMaterials TestingAcetone

ดูงานวิจัยทั้งหมดที่เกี่ยวข้อง

กรองห้องสมุดงานวิจัยด้วยชื่อเรื่อง ชื่อผู้เขียน หรือปีที่ตีพิมพ์ของงานวิจัยนี้

งานวิจัยที่เกี่ยวข้อง