ระดับ D· รากฐานทางวิทยาศาสตร์จากห้องปฏิบัติการและสัตว์ทดลองการศึกษาในห้องปฏิบัติการPubMed

Modulation of human mesenchymal stem cell behavior on ordered tantalum nanotopographies fabricated using colloidal lithography and glancing angle deposition.

Wang PY., Bennetsen DT., Foss M., Ameringer T., Thissen H., Kingshott P.

การศึกษาในห้องปฏิบัติการ เกี่ยวกับ ใบหน้าและผิว ตีพิมพ์ในวารสาร ACS Appl Mater Interfaces ปี 2015 — สรุปอัตโนมัติจากบทคัดย่อ PubMed

เปิดรายการอ่านของฉัน
ระดับ D· รากฐานทางวิทยาศาสตร์จากห้องปฏิบัติการและสัตว์ทดลองระดับหลักฐานของงานวิจัยนี้

หลักฐานจากการศึกษาในห้องปฏิบัติการและสัตว์ทดลอง เป็นรากฐานที่ช่วยให้เข้าใจกลไกและศักยภาพก่อนการศึกษาในมนุษย์ต่อไป

  • ระดับ A · หลักฐานทางคลินิกค่อนข้างแข็งแรง
  • ระดับ B · หลักฐานทางคลินิกที่กำลังเติบโตและมีสัญญาณเชิงบวก
  • ระดับ C · งานวิจัยในมนุษย์ระยะต้นที่กำลังสำรวจประโยชน์
  • ระดับ D · รากฐานทางวิทยาศาสตร์จากห้องปฏิบัติการและสัตว์ทดลอง
  • กำลังศึกษาเพิ่มเติม · หัวข้อใหม่ที่นักวิจัยกำลังสำรวจอย่างต่อเนื่อง
อ่านคำอธิบายระดับหลักฐาน A–D

ข้อมูลหน้านี้ดึงมาจากฐานข้อมูล PubMed โดยตรง คำอธิบายภาษาไทยเป็นสรุปอัตโนมัติจากข้อมูลบรรณานุกรมและบทคัดย่อ ไม่ใช่การแปลทั้งฉบับ และไม่ใช่คำแนะนำทางการแพทย์

ประเภทการศึกษา
การศึกษาในห้องปฏิบัติการ
วารสาร
ACS Appl Mater Interfaces (2015)
ประเทศ
United States
จำนวนผู้เข้าร่วม (จากบทคัดย่อ)
—
แหล่งข้อมูล
PubMed
PMID
25664369
DOI
10.1021/acsami.5b00107
จำนวนการอ้างอิง
33

บทคัดย่อ (ต้นฉบับภาษาอังกฤษ)

Ordered surface nanostructures have attracted much attention in biotechnology and biomedical engineering because of their potential to modulate cell-surface interactions in a controllable manner. However, the ability to fabricate large area ordered nanostructures is limited because of high costs and low speed of fabrication. Here, we have fabricated ordered nanostructures with large surface areas (1.5 × 1.5 cm(2)) using a combination of facile techniques including colloidal self-assembly, colloidal lithography and glancing angle deposition (GLAD). Polystyrene (722 nm) colloids were self-assembled into a hexagonally close-packed (hcp) crystal array at the water-air interface, transferred on a biocompatible tantalum (Ta) surface and used as a mask to generate an ordered Ta pattern. The Ta was deposited by sputter coating through the crystal mask creating approximately 60-nm-high feature sizes. The feature size was further increased by approximately 200-nm-height respectively using GLAD, resulting in the fabrication of four different surfaces (FLAT, Ta60, GLAD100, and GLAD200). Cell adhesion, proliferation, and osteogenic differentiation of primary human adipose-derived stem cells (hADSCs) were studied on these ordered nanostructures for up to 2 weeks. Our results suggested that cell spreading, focal adhesion formation, and filopodia extension of hADSCs were inhibited on the GLAD

สิ่งที่งานวิจัยนี้ไม่ได้พิสูจน์

  • • งานวิจัยนี้ไม่ได้พิสูจน์ว่า SVF เป็นการรักษาที่ได้รับการรับรอง หรือใช้แทนการรักษามาตรฐานได้
  • • เป็นการศึกษาก่อนคลินิก ผลในสัตว์ทดลองหรือห้องปฏิบัติการไม่สามารถนำมาสรุปผลในมนุษย์ได้

ระดับหลักฐาน

หลักฐานจากการศึกษาในห้องปฏิบัติการและสัตว์ทดลอง เป็นรากฐานที่ช่วยให้เข้าใจกลไกและศักยภาพก่อนการศึกษาในมนุษย์ต่อไป

ดูวิธีจัดระดับหลักฐาน
Adipose TissueCell DifferentiationCells, CulturedCollagen Type IColloidsHumansMesenchymal Stem CellsMicroscopy, ConfocalNanostructuresOsteocalcin

ดูงานวิจัยทั้งหมดที่เกี่ยวข้อง

กรองห้องสมุดงานวิจัยด้วยชื่อเรื่อง ชื่อผู้เขียน หรือปีที่ตีพิมพ์ของงานวิจัยนี้

งานวิจัยที่เกี่ยวข้อง