ระดับ D· รากฐานทางวิทยาศาสตร์จากห้องปฏิบัติการและสัตว์ทดลองการศึกษาในห้องปฏิบัติการPubMedเข้าถึงฉบับเต็มได้ฟรี

Nanomechanical mapping of PLA hydroxyapatite composite scaffolds links surface homogeneity to stem cell differentiation.

Sitthisang S., Hou X., Treetong A., Xu X., Liu W., He C.

การศึกษาในห้องปฏิบัติการ เกี่ยวกับ ใบหน้าและผิว ตีพิมพ์ในวารสาร Sci Rep ปี 2024 — สรุปอัตโนมัติจากบทคัดย่อ PubMed

เปิดรายการอ่านของฉัน
ระดับ D· รากฐานทางวิทยาศาสตร์จากห้องปฏิบัติการและสัตว์ทดลองระดับหลักฐานของงานวิจัยนี้

หลักฐานจากการศึกษาในห้องปฏิบัติการและสัตว์ทดลอง เป็นรากฐานที่ช่วยให้เข้าใจกลไกและศักยภาพก่อนการศึกษาในมนุษย์ต่อไป

  • ระดับ A · หลักฐานทางคลินิกค่อนข้างแข็งแรง
  • ระดับ B · หลักฐานทางคลินิกที่กำลังเติบโตและมีสัญญาณเชิงบวก
  • ระดับ C · งานวิจัยในมนุษย์ระยะต้นที่กำลังสำรวจประโยชน์
  • ระดับ D · รากฐานทางวิทยาศาสตร์จากห้องปฏิบัติการและสัตว์ทดลอง
  • กำลังศึกษาเพิ่มเติม · หัวข้อใหม่ที่นักวิจัยกำลังสำรวจอย่างต่อเนื่อง
อ่านคำอธิบายระดับหลักฐาน A–D

ข้อมูลหน้านี้ดึงมาจากฐานข้อมูล PubMed โดยตรง คำอธิบายภาษาไทยเป็นสรุปอัตโนมัติจากข้อมูลบรรณานุกรมและบทคัดย่อ ไม่ใช่การแปลทั้งฉบับ และไม่ใช่คำแนะนำทางการแพทย์

ประเภทการศึกษา
การศึกษาในห้องปฏิบัติการ
วารสาร
Sci Rep (2024)
ประเทศ
England
จำนวนผู้เข้าร่วม (จากบทคัดย่อ)
—
แหล่งข้อมูล
PubMed
PMID
39256445
PMCID
PMC11387746
DOI
10.1038/s41598-024-72073-z
จำนวนการอ้างอิง
6

บทคัดย่อ (ต้นฉบับภาษาอังกฤษ)

Polymer composite scaffolds hold promise in bone tissue engineering due to their biocompatibility, mechanical properties, and reproducibility. Among these materials, polylactic acid (PLA), a biodegradable plastics has gained attention for its processability characteristics. However, a deeper understanding of how PLA scaffold surface properties influence cell behavior is enssential for advancing its applications. In this study, 3D-printed PLA scaffolds containing hydroxyapatite (HA) were analyzed using atomic force microscopy and nanomechanical mapping. The addition of HA significantly increased key surface properties compared to unmodified PLA scaffols. Notably, the HA-modified scaffold demonstrated Gaussian distribution of stiffness and adhesive forces, in contrast to the bimodal properties observed in the unmodified PLA scaffolds. Human adipose-derived mesenchymal stem cell (hADMSC) seeded on the 3D-printed PLA scaffolds blended with 10% HA (P10) exhibited strong attachment. After four weeks, osteogenic differentiation of hADMSCs was detected, with calcium deposition reaching 6.76% ± 0.12. These results suggest that specific ranges of stiffness and adhesive forces of the composite scaffold can support cell attachement, and mineralization. The study highlights that tailoring suface properties of composite scaffolds is crucial for modulating cellular interactions, thus advancin

สิ่งที่งานวิจัยนี้ไม่ได้พิสูจน์

  • • งานวิจัยนี้ไม่ได้พิสูจน์ว่า SVF เป็นการรักษาที่ได้รับการรับรอง หรือใช้แทนการรักษามาตรฐานได้
  • • เป็นการศึกษาก่อนคลินิก ผลในสัตว์ทดลองหรือห้องปฏิบัติการไม่สามารถนำมาสรุปผลในมนุษย์ได้

ระดับหลักฐาน

หลักฐานจากการศึกษาในห้องปฏิบัติการและสัตว์ทดลอง เป็นรากฐานที่ช่วยให้เข้าใจกลไกและศักยภาพก่อนการศึกษาในมนุษย์ต่อไป

ดูวิธีจัดระดับหลักฐาน
DurapatiteHumansCell DifferentiationTissue ScaffoldsPolyestersMesenchymal Stem CellsSurface PropertiesOsteogenesisTissue EngineeringPrinting, Three-Dimensional

ดูงานวิจัยทั้งหมดที่เกี่ยวข้อง

กรองห้องสมุดงานวิจัยด้วยชื่อเรื่อง ชื่อผู้เขียน หรือปีที่ตีพิมพ์ของงานวิจัยนี้

งานวิจัยที่เกี่ยวข้อง