ระดับ D· รากฐานทางวิทยาศาสตร์จากห้องปฏิบัติการและสัตว์ทดลองการศึกษาในสัตว์ทดลองPubMedเข้าถึงฉบับเต็มได้ฟรี

Optimizing mandibular bone defect reconstruction using adipose-derived stem cells on 3-dimensionally printed polycaprolactone/xenograft scaffolds in canine model.

Mahdigholi N., Khojasteh A., Aminianfar H., Masoudifard M., Jabbarifakhr M., Nokhbatolfoghahaei H.

การศึกษาในสัตว์ทดลอง เกี่ยวกับ ใบหน้าและผิว ตีพิมพ์ในวารสาร BMC Oral Health ปี 2025 — สรุปอัตโนมัติจากบทคัดย่อ PubMed

เปิดรายการอ่านของฉัน
ระดับ D· รากฐานทางวิทยาศาสตร์จากห้องปฏิบัติการและสัตว์ทดลองระดับหลักฐานของงานวิจัยนี้

หลักฐานจากการศึกษาในห้องปฏิบัติการและสัตว์ทดลอง เป็นรากฐานที่ช่วยให้เข้าใจกลไกและศักยภาพก่อนการศึกษาในมนุษย์ต่อไป

  • ระดับ A · หลักฐานทางคลินิกค่อนข้างแข็งแรง
  • ระดับ B · หลักฐานทางคลินิกที่กำลังเติบโตและมีสัญญาณเชิงบวก
  • ระดับ C · งานวิจัยในมนุษย์ระยะต้นที่กำลังสำรวจประโยชน์
  • ระดับ D · รากฐานทางวิทยาศาสตร์จากห้องปฏิบัติการและสัตว์ทดลอง
  • กำลังศึกษาเพิ่มเติม · หัวข้อใหม่ที่นักวิจัยกำลังสำรวจอย่างต่อเนื่อง
อ่านคำอธิบายระดับหลักฐาน A–D

ข้อมูลหน้านี้ดึงมาจากฐานข้อมูล PubMed โดยตรง คำอธิบายภาษาไทยเป็นสรุปอัตโนมัติจากข้อมูลบรรณานุกรมและบทคัดย่อ ไม่ใช่การแปลทั้งฉบับ และไม่ใช่คำแนะนำทางการแพทย์

ประเภทการศึกษา
การศึกษาในสัตว์ทดลอง
วารสาร
BMC Oral Health (2025)
ประเทศ
England
จำนวนผู้เข้าร่วม (จากบทคัดย่อ)
—
แหล่งข้อมูล
PubMed
PMID
41456036
PMCID
PMC12860160
DOI
10.1186/s12903-025-07571-1

บทคัดย่อ (ต้นฉบับภาษาอังกฤษ)

Background Mandibular bone defects present significant challenges in reconstructive surgery due to their complex structure, and the body's limited ability to heal these areas naturally. Tissue engineering provides a promising solution, combined with stem cell therapy to overcome these obstacles. This study investigated the effects of adipose-derived mesenchymal stem cells (ADSCs) cultured on novel three-dimensional (3D)-printed polycaprolactone/xenograft scaffolds on the reconstruction and regeneration of segmental mandibular bone defects in canine models. Methods 3D-printed personalized PCL/xenograft scaffolds were designed and fabricated. After isolation and cultivation of canine ADSCs from their falciform tissues, they were seeded on 3D-printed scaffolds sterilized by gamma ray and implanted on 20 mm unilateral segmental mandibular bone defects of three dogs as the experimental group. Another three dogs received untreated scaffolds for their segmental defects. The defects were fixed with titanium plates. At 20 weeks post-implantation, the animals were sacrificed, the samples were harvested from all animals of both groups and three-dimensional microcomputed tomography (MicroCT), histopathological and immunohistochemistry analyses were performed. The parameters assessed included bone volume fraction, trabecular separation, trabecular number, trabecular thickness, new bone form

สิ่งที่งานวิจัยนี้ไม่ได้พิสูจน์

  • • งานวิจัยนี้ไม่ได้พิสูจน์ว่า SVF เป็นการรักษาที่ได้รับการรับรอง หรือใช้แทนการรักษามาตรฐานได้
  • • เป็นการศึกษาก่อนคลินิก ผลในสัตว์ทดลองหรือห้องปฏิบัติการไม่สามารถนำมาสรุปผลในมนุษย์ได้

ระดับหลักฐาน

หลักฐานจากการศึกษาในห้องปฏิบัติการและสัตว์ทดลอง เป็นรากฐานที่ช่วยให้เข้าใจกลไกและศักยภาพก่อนการศึกษาในมนุษย์ต่อไป

ดูวิธีจัดระดับหลักฐาน
AnimalsDogsTissue ScaffoldsPrinting, Three-DimensionalPolyestersX-Ray MicrotomographyAdipose TissueTissue EngineeringMandibleBone Regeneration

ดูงานวิจัยทั้งหมดที่เกี่ยวข้อง

กรองห้องสมุดงานวิจัยด้วยชื่อเรื่อง ชื่อผู้เขียน หรือปีที่ตีพิมพ์ของงานวิจัยนี้

งานวิจัยที่เกี่ยวข้อง