ระดับ D· รากฐานทางวิทยาศาสตร์จากห้องปฏิบัติการและสัตว์ทดลองการศึกษาในสัตว์ทดลองPubMed

Osteon-mimetic 3D nanofibrous scaffold enhances stem cell proliferation and osteogenic differentiation for bone regeneration.

Song T., Zhou J., Shi M., Xuan L., Jiang H., Lin Z.

การศึกษาในสัตว์ทดลอง เกี่ยวกับ ใบหน้าและผิว ตีพิมพ์ในวารสาร Biomater Sci ปี 2022 — สรุปอัตโนมัติจากบทคัดย่อ PubMed

เปิดรายการอ่านของฉัน
ระดับ D· รากฐานทางวิทยาศาสตร์จากห้องปฏิบัติการและสัตว์ทดลองระดับหลักฐานของงานวิจัยนี้

หลักฐานจากการศึกษาในห้องปฏิบัติการและสัตว์ทดลอง เป็นรากฐานที่ช่วยให้เข้าใจกลไกและศักยภาพก่อนการศึกษาในมนุษย์ต่อไป

  • ระดับ A · หลักฐานทางคลินิกค่อนข้างแข็งแรง
  • ระดับ B · หลักฐานทางคลินิกที่กำลังเติบโตและมีสัญญาณเชิงบวก
  • ระดับ C · งานวิจัยในมนุษย์ระยะต้นที่กำลังสำรวจประโยชน์
  • ระดับ D · รากฐานทางวิทยาศาสตร์จากห้องปฏิบัติการและสัตว์ทดลอง
  • กำลังศึกษาเพิ่มเติม · หัวข้อใหม่ที่นักวิจัยกำลังสำรวจอย่างต่อเนื่อง
อ่านคำอธิบายระดับหลักฐาน A–D

ข้อมูลหน้านี้ดึงมาจากฐานข้อมูล PubMed โดยตรง คำอธิบายภาษาไทยเป็นสรุปอัตโนมัติจากข้อมูลบรรณานุกรมและบทคัดย่อ ไม่ใช่การแปลทั้งฉบับ และไม่ใช่คำแนะนำทางการแพทย์

ประเภทการศึกษา
การศึกษาในสัตว์ทดลอง
วารสาร
Biomater Sci (2022)
ประเทศ
England
จำนวนผู้เข้าร่วม (จากบทคัดย่อ)
—
แหล่งข้อมูล
PubMed
PMID
35040827
DOI
10.1039/d1bm01489g
จำนวนการอ้างอิง
13

บทคัดย่อ (ต้นฉบับภาษาอังกฤษ)

The scaffold microstructure is important for bone tissue engineering. Failure to synergistically imitate the hierarchical microstructure of the components of bone, such as an osteon with concentric multilayers assembled by nanofibers, hinders the performance for guiding bone regeneration. Here, a 2D bilayer nanofibrous membrane (BLM) containing poly(lactide- co -glycolide) (PLGA)/polycaprolactone (PCL) composite membranes in similar compositions (PCL15 and PCL20), but possessing different degrees of shrinkage, was fabricated via sequential electrospinning. Upon incubation in phosphate buffered saline (PBS) (37 °C), the 2D BLM spontaneously deformed into a 3D shape induced by PCL crystallization within the PLGA matrix, and the PCL15 and PCL20 layer formed a concave and convex surface, respectively. The 3D structure contained curved multilayers with an average diameter of 776 ± 169 μm, and on the concave and convex surface the nanofiber diameters were 792 ± 225 and 881 ± 259 nm, respectively. The initial 2D structure facilitated the even distribution of seeded cells. Adipose-derived stem cells from rats (rADSCs) proliferated faster on a concave surface than on a convex surface. For the 3D BLM, the osteogenic differentiation of rADSCs was significantly higher than that on 2D surfaces, even without osteogenic supplements, which resulted from the stretched cell morphology on the cur

สิ่งที่งานวิจัยนี้ไม่ได้พิสูจน์

  • • งานวิจัยนี้ไม่ได้พิสูจน์ว่า SVF เป็นการรักษาที่ได้รับการรับรอง หรือใช้แทนการรักษามาตรฐานได้
  • • เป็นการศึกษาก่อนคลินิก ผลในสัตว์ทดลองหรือห้องปฏิบัติการไม่สามารถนำมาสรุปผลในมนุษย์ได้

ระดับหลักฐาน

หลักฐานจากการศึกษาในห้องปฏิบัติการและสัตว์ทดลอง เป็นรากฐานที่ช่วยให้เข้าใจกลไกและศักยภาพก่อนการศึกษาในมนุษย์ต่อไป

ดูวิธีจัดระดับหลักฐาน
AnimalsBone RegenerationCell DifferentiationCell ProliferationHaversian SystemNanofibersOsteogenesisPolyestersRatsRats, Sprague-Dawley

ดูงานวิจัยทั้งหมดที่เกี่ยวข้อง

กรองห้องสมุดงานวิจัยด้วยชื่อเรื่อง ชื่อผู้เขียน หรือปีที่ตีพิมพ์ของงานวิจัยนี้

งานวิจัยที่เกี่ยวข้อง