ระดับ D· รากฐานทางวิทยาศาสตร์จากห้องปฏิบัติการและสัตว์ทดลองการศึกษาในสัตว์ทดลองPubMedเข้าถึงฉบับเต็มได้ฟรี

A preliminary study of cell-based bone tissue engineering into 3D-printed β-tricalcium phosphate scaffolds and polydioxanone membranes.

Pitol-Palin L., Moura J., Frigério PB., de Souza Batista FR., Saska S., Oliveira LJM.

การศึกษาในสัตว์ทดลอง เกี่ยวกับ ใบหน้าและผิว ตีพิมพ์ในวารสาร Sci Rep ปี 2024 — สรุปอัตโนมัติจากบทคัดย่อ PubMed

เปิดรายการอ่านของฉัน
ระดับ D· รากฐานทางวิทยาศาสตร์จากห้องปฏิบัติการและสัตว์ทดลองระดับหลักฐานของงานวิจัยนี้

หลักฐานจากการศึกษาในห้องปฏิบัติการและสัตว์ทดลอง เป็นรากฐานที่ช่วยให้เข้าใจกลไกและศักยภาพก่อนการศึกษาในมนุษย์ต่อไป

  • ระดับ A · หลักฐานทางคลินิกค่อนข้างแข็งแรง
  • ระดับ B · หลักฐานทางคลินิกที่กำลังเติบโตและมีสัญญาณเชิงบวก
  • ระดับ C · งานวิจัยในมนุษย์ระยะต้นที่กำลังสำรวจประโยชน์
  • ระดับ D · รากฐานทางวิทยาศาสตร์จากห้องปฏิบัติการและสัตว์ทดลอง
  • กำลังศึกษาเพิ่มเติม · หัวข้อใหม่ที่นักวิจัยกำลังสำรวจอย่างต่อเนื่อง
อ่านคำอธิบายระดับหลักฐาน A–D

ข้อมูลหน้านี้ดึงมาจากฐานข้อมูล PubMed โดยตรง คำอธิบายภาษาไทยเป็นสรุปอัตโนมัติจากข้อมูลบรรณานุกรมและบทคัดย่อ ไม่ใช่การแปลทั้งฉบับ และไม่ใช่คำแนะนำทางการแพทย์

ประเภทการศึกษา
การศึกษาในสัตว์ทดลอง
วารสาร
Sci Rep (2024)
ประเทศ
England
จำนวนผู้เข้าร่วม (จากบทคัดย่อ)
—
แหล่งข้อมูล
PubMed
PMID
39732806
PMCID
PMC11682175
DOI
10.1038/s41598-024-82334-6
จำนวนการอ้างอิง
5

บทคัดย่อ (ต้นฉบับภาษาอังกฤษ)

Treatment of complex craniofacial deformities is still a challenge for medicine and dentistry because few approach therapies are available on the market that allow rehabilitation using 3D-printed medical devices. Thus, this study aims to create a scaffold with a morphology that simulates bone tissue, able to create a favorable environment for the development and differentiation of osteogenic cells. Moreover, its association with Plenum Guide, through cell-based tissue engineering (ASCs) for guided bone regeneration in critical rat calvarial defects. The manufacturing and characterization of 3D-printed β-TCP scaffolds for experimental surgery was performed. Nine male rats were divided into three groups: β-TCP + PDO membrane (TCP/PG), β-TCP/ASCs + PDO membrane (TCPasc/PG), and β-TCP/ASCs + PDO membrane/ASCs (TCPasc/PGasc). A surgical defect with a 5-mm diameter was performed in the right parietal bone, and the defect was filled with the 3D-printed β-TCP scaffold and PDO membrane with or without ASCs. The animals were euthanized 7, 14, and 30 days after the surgical procedure for histomorphometric and immunolabeling analyses. 3D-printed β-TCP scaffolds were created with a 404 ± 0.0238 μm gyroid macro-pore and, the association to cell-based therapy promotes, especially in the TCPasc/PGasc group, a bone area formation at the defect border region and the center of the defect. The use

สิ่งที่งานวิจัยนี้ไม่ได้พิสูจน์

  • • งานวิจัยนี้ไม่ได้พิสูจน์ว่า SVF เป็นการรักษาที่ได้รับการรับรอง หรือใช้แทนการรักษามาตรฐานได้
  • • เป็นการศึกษาก่อนคลินิก ผลในสัตว์ทดลองหรือห้องปฏิบัติการไม่สามารถนำมาสรุปผลในมนุษย์ได้

ระดับหลักฐาน

หลักฐานจากการศึกษาในห้องปฏิบัติการและสัตว์ทดลอง เป็นรากฐานที่ช่วยให้เข้าใจกลไกและศักยภาพก่อนการศึกษาในมนุษย์ต่อไป

ดูวิธีจัดระดับหลักฐาน
AnimalsCalcium PhosphatesTissue ScaffoldsTissue EngineeringPrinting, Three-DimensionalRatsMaleBone RegenerationOsteogenesisPolydioxanone

ดูงานวิจัยทั้งหมดที่เกี่ยวข้อง

กรองห้องสมุดงานวิจัยด้วยชื่อเรื่อง ชื่อผู้เขียน หรือปีที่ตีพิมพ์ของงานวิจัยนี้

งานวิจัยที่เกี่ยวข้อง