ระดับ D· รากฐานทางวิทยาศาสตร์จากห้องปฏิบัติการและสัตว์ทดลองการศึกษาในห้องปฏิบัติการEurope PMCเข้าถึงฉบับเต็มได้ฟรี

Selective biofunctionalization of 3D cell-imprinted PDMS with collagen immobilization for targeted cell attachment

Babaei M., Bonakdar S., Nasernejad B.

การศึกษาในห้องปฏิบัติการ เกี่ยวกับ ใบหน้าและผิว, สะโพก ตีพิมพ์ในวารสาร Sci Rep ปี 2022 — สรุปอัตโนมัติจากบทคัดย่อ PubMed

เปิดรายการอ่านของฉัน
ระดับ D· รากฐานทางวิทยาศาสตร์จากห้องปฏิบัติการและสัตว์ทดลองระดับหลักฐานของงานวิจัยนี้

หลักฐานจากการศึกษาในห้องปฏิบัติการและสัตว์ทดลอง เป็นรากฐานที่ช่วยให้เข้าใจกลไกและศักยภาพก่อนการศึกษาในมนุษย์ต่อไป

  • ระดับ A · หลักฐานทางคลินิกค่อนข้างแข็งแรง
  • ระดับ B · หลักฐานทางคลินิกที่กำลังเติบโตและมีสัญญาณเชิงบวก
  • ระดับ C · งานวิจัยในมนุษย์ระยะต้นที่กำลังสำรวจประโยชน์
  • ระดับ D · รากฐานทางวิทยาศาสตร์จากห้องปฏิบัติการและสัตว์ทดลอง
  • กำลังศึกษาเพิ่มเติม · หัวข้อใหม่ที่นักวิจัยกำลังสำรวจอย่างต่อเนื่อง
อ่านคำอธิบายระดับหลักฐาน A–D

ข้อมูลหน้านี้ดึงมาจากฐานข้อมูล PubMed โดยตรง คำอธิบายภาษาไทยเป็นสรุปอัตโนมัติจากข้อมูลบรรณานุกรมและบทคัดย่อ ไม่ใช่การแปลทั้งฉบับ และไม่ใช่คำแนะนำทางการแพทย์

ประเภทการศึกษา
การศึกษาในห้องปฏิบัติการ
วารสาร
Sci Rep (2022)
จำนวนผู้เข้าร่วม (จากบทคัดย่อ)
—
แหล่งข้อมูล
Europe PMC
PMID
35896682
PMCID
PMC9329428
DOI
10.1038/s41598-022-17252-6
จำนวนการอ้างอิง
12

บทคัดย่อ (ต้นฉบับภาษาอังกฤษ)

Cell-imprinted polydimethylsiloxane substrates, in terms of their ability to mimic the physiological niche, low microfabrication cost, and excellent biocompatibility were widely used in tissue engineering. Cells inside the mature cells' cell-imprinted PDMS pattern have been shown in previous research to be capable of being differentiated into a specific mature cell line. On the other hand, the hydrophobicity of PDMS substrate leads to weak cell adhesion. Moreover, there was no guarantee that the cells would be exactly located in the cavities of the cells' pattern. In many studies, PDMS surface was modified by plasma treatment, chemical modification, and ECM coating. Hence, to increase the efficiency of cell-imprinting method, the concavity region created by the cell-imprinted pattern is conjugated with collagen. A simple and economical method of epoxy silane resin was applied for the selective protein immobilization on the desired regions of the PDMS substrate. This method could be paved to enhance the cell trapping into the cell-imprinted pattern, and it could be helpful for stem cell differentiation studies. The applied method for selective protein attachment, and as a consequence, selective cell integration was assessed on the aligned cell-imprinted PDMS. A microfluidic chip created the aligned cell pattern. After Ar + plasma and APTES treatment of the PDMS substrate, collag

สิ่งที่งานวิจัยนี้ไม่ได้พิสูจน์

  • • งานวิจัยนี้ไม่ได้พิสูจน์ว่า SVF เป็นการรักษาที่ได้รับการรับรอง หรือใช้แทนการรักษามาตรฐานได้
  • • เป็นการศึกษาก่อนคลินิก ผลในสัตว์ทดลองหรือห้องปฏิบัติการไม่สามารถนำมาสรุปผลในมนุษย์ได้

ระดับหลักฐาน

หลักฐานจากการศึกษาในห้องปฏิบัติการและสัตว์ทดลอง เป็นรากฐานที่ช่วยให้เข้าใจกลไกและศักยภาพก่อนการศึกษาในมนุษย์ต่อไป

ดูวิธีจัดระดับหลักฐาน
Cell LineSilanesDimethylpolysiloxanesCollagenCell AdhesionCell Differentiation

ดูงานวิจัยทั้งหมดที่เกี่ยวข้อง

กรองห้องสมุดงานวิจัยด้วยชื่อเรื่อง ชื่อผู้เขียน หรือปีที่ตีพิมพ์ของงานวิจัยนี้

งานวิจัยที่เกี่ยวข้อง