ระดับ D· รากฐานทางวิทยาศาสตร์จากห้องปฏิบัติการและสัตว์ทดลองการศึกษาในห้องปฏิบัติการPubMed

Surface-modified bioresorbable electrospun scaffolds for improving hemocompatibility of vascular grafts.

Caracciolo PC., Rial-Hermida MI., Montini-Ballarin F., Abraham GA., Concheiro A., Alvarez-Lorenzo C.

การศึกษาในห้องปฏิบัติการ เกี่ยวกับ ใบหน้าและผิว ตีพิมพ์ในวารสาร Mater Sci Eng C Mater Biol Appl ปี 2017 — สรุปอัตโนมัติจากบทคัดย่อ PubMed

เปิดรายการอ่านของฉัน
ระดับ D· รากฐานทางวิทยาศาสตร์จากห้องปฏิบัติการและสัตว์ทดลองระดับหลักฐานของงานวิจัยนี้

หลักฐานจากการศึกษาในห้องปฏิบัติการและสัตว์ทดลอง เป็นรากฐานที่ช่วยให้เข้าใจกลไกและศักยภาพก่อนการศึกษาในมนุษย์ต่อไป

  • ระดับ A · หลักฐานทางคลินิกค่อนข้างแข็งแรง
  • ระดับ B · หลักฐานทางคลินิกที่กำลังเติบโตและมีสัญญาณเชิงบวก
  • ระดับ C · งานวิจัยในมนุษย์ระยะต้นที่กำลังสำรวจประโยชน์
  • ระดับ D · รากฐานทางวิทยาศาสตร์จากห้องปฏิบัติการและสัตว์ทดลอง
  • กำลังศึกษาเพิ่มเติม · หัวข้อใหม่ที่นักวิจัยกำลังสำรวจอย่างต่อเนื่อง
อ่านคำอธิบายระดับหลักฐาน A–D

ข้อมูลหน้านี้ดึงมาจากฐานข้อมูล PubMed โดยตรง คำอธิบายภาษาไทยเป็นสรุปอัตโนมัติจากข้อมูลบรรณานุกรมและบทคัดย่อ ไม่ใช่การแปลทั้งฉบับ และไม่ใช่คำแนะนำทางการแพทย์

ประเภทการศึกษา
การศึกษาในห้องปฏิบัติการ
วารสาร
Mater Sci Eng C Mater Biol Appl (2017)
ประเทศ
Netherlands
จำนวนผู้เข้าร่วม (จากบทคัดย่อ)
—
แหล่งข้อมูล
PubMed
PMID
28415397
DOI
10.1016/j.msec.2017.02.151
จำนวนการอ้างอิง
25

บทคัดย่อ (ต้นฉบับภาษาอังกฤษ)

The replacement of small-diameter vessels is one of the main challenges in tissue engineering. Moreover, the surface modification of small-diameter vascular grafts (SDVG) is a key factor in the success of the therapy due to their increased thrombogenicity and infection susceptibility caused by the lack of a functional endothelium. In this work, electrospun scaffolds were prepared from blends of poly(L-lactic acid) (PLLA) and segmented polyurethane (PHD) with a composition designed to perform as SDVG inner layer. The scaffolds were then successfully surface-modified with heparin following two different strategies that rely on grafting of heparin to either PLLA or PHD functional groups. Both strategies afforded high heparin density, being higher for urethane methodology. The functionalized scaffolds did not cause hemolysis and inhibited platelet adhesion to a large extent. However, lysozyme/heparin-functionalized scaffolds obtained through urethane methodology achieved the highest platelet attachment inhibition. The increase in hydrophilicity and water absorption of the surface-functionalized nanostructures favored adhesion and proliferation of human adipose-derived stem cells. Heparinized surfaces conjugated with lysozyme presented microbial hydrolysis activity dependent on heparin content. Overall, a better performance obtained for urethane-modified scaffold, added to the fact

สิ่งที่งานวิจัยนี้ไม่ได้พิสูจน์

  • • งานวิจัยนี้ไม่ได้พิสูจน์ว่า SVF เป็นการรักษาที่ได้รับการรับรอง หรือใช้แทนการรักษามาตรฐานได้
  • • เป็นการศึกษาก่อนคลินิก ผลในสัตว์ทดลองหรือห้องปฏิบัติการไม่สามารถนำมาสรุปผลในมนุษย์ได้

ระดับหลักฐาน

หลักฐานจากการศึกษาในห้องปฏิบัติการและสัตว์ทดลอง เป็นรากฐานที่ช่วยให้เข้าใจกลไกและศักยภาพก่อนการศึกษาในมนุษย์ต่อไป

ดูวิธีจัดระดับหลักฐาน
Absorbable ImplantsBlood PlateletsBlood Vessel ProsthesisCoated Materials, BiocompatibleHeparinHumansMuramidasePlatelet AdhesivenessPolyestersPolyurethanes

ดูงานวิจัยทั้งหมดที่เกี่ยวข้อง

กรองห้องสมุดงานวิจัยด้วยชื่อเรื่อง ชื่อผู้เขียน หรือปีที่ตีพิมพ์ของงานวิจัยนี้

งานวิจัยที่เกี่ยวข้อง