ระดับ D· รากฐานทางวิทยาศาสตร์จากห้องปฏิบัติการและสัตว์ทดลองการศึกษาในสัตว์ทดลองPubMedเข้าถึงฉบับเต็มได้ฟรี

3D bioprinting of fish skin-based gelatin methacryloyl (GelMA) bio-ink for use as a potential skin substitute.

Tanadchangsaeng N., Pasanaphong K., Tawonsawatruk T., Rattanapinyopituk K., Tangketsarawan B., Rawiwet V.

การศึกษาในสัตว์ทดลอง เกี่ยวกับ แผลเรื้อรัง ตีพิมพ์ในวารสาร Sci Rep ปี 2024 — สรุปอัตโนมัติจากบทคัดย่อ PubMed

เปิดรายการอ่านของฉัน
ระดับ D· รากฐานทางวิทยาศาสตร์จากห้องปฏิบัติการและสัตว์ทดลองระดับหลักฐานของงานวิจัยนี้

หลักฐานจากการศึกษาในห้องปฏิบัติการและสัตว์ทดลอง เป็นรากฐานที่ช่วยให้เข้าใจกลไกและศักยภาพก่อนการศึกษาในมนุษย์ต่อไป

  • ระดับ A · หลักฐานทางคลินิกค่อนข้างแข็งแรง
  • ระดับ B · หลักฐานทางคลินิกที่กำลังเติบโตและมีสัญญาณเชิงบวก
  • ระดับ C · งานวิจัยในมนุษย์ระยะต้นที่กำลังสำรวจประโยชน์
  • ระดับ D · รากฐานทางวิทยาศาสตร์จากห้องปฏิบัติการและสัตว์ทดลอง
  • กำลังศึกษาเพิ่มเติม · หัวข้อใหม่ที่นักวิจัยกำลังสำรวจอย่างต่อเนื่อง
อ่านคำอธิบายระดับหลักฐาน A–D

ข้อมูลหน้านี้ดึงมาจากฐานข้อมูล PubMed โดยตรง คำอธิบายภาษาไทยเป็นสรุปอัตโนมัติจากข้อมูลบรรณานุกรมและบทคัดย่อ ไม่ใช่การแปลทั้งฉบับ และไม่ใช่คำแนะนำทางการแพทย์

ประเภทการศึกษา
การศึกษาในสัตว์ทดลอง
วารสาร
Sci Rep (2024)
ประเทศ
England
จำนวนผู้เข้าร่วม (จากบทคัดย่อ)
—
แหล่งข้อมูล
PubMed
PMID
39369014
PMCID
PMC11455937
DOI
10.1038/s41598-024-73774-1
จำนวนการอ้างอิง
16

บทคัดย่อ (ต้นฉบับภาษาอังกฤษ)

Gelatin methacryloyl (GelMA), typically derived from mammalian sources, has recently emerged as an ideal bio-ink for three-dimensional (3D) bioprinting. Herein, we developed a fish skin-based GelMA bio-ink for the fabrication of a 3D GelMA skin substitute with a 3D bioprinter. Several concentrations of methacrylic acid anhydride were used to fabricate GelMA, in which their physical-mechanical properties were assessed. This fish skin-based GelMA bio-ink was loaded with human adipose tissue-derived mesenchymal stromal cells (ASCs) and human platelet lysate (HPL) and then printed to obtain 3D ASCs + HPL-loaded GelMA scaffolds. Cell viability test and a preliminary investigation of its effectiveness in promoting wound closure were evaluated in a critical-sized full thickness skin defect in a rat model. The cell viability results showed that the number of ASCs increased significantly within the 3D GelMA hydrogel scaffold, indicating its biocompatibility property. In vivo results demonstrated that ASCs + HPL-loaded GelMA scaffolds could delay wound contraction, markedly enhanced collagen deposition, and promoted the formation of new blood vessels, especially at the wound edge, compared to the untreated group. Therefore, this newly fish skin-based GelMA bio-ink developed in this study has the potential to be utilized for the printing of 3D GelMA skin substitutes.

สิ่งที่งานวิจัยนี้ไม่ได้พิสูจน์

  • • งานวิจัยนี้ไม่ได้พิสูจน์ว่า SVF เป็นการรักษาที่ได้รับการรับรอง หรือใช้แทนการรักษามาตรฐานได้
  • • เป็นการศึกษาก่อนคลินิก ผลในสัตว์ทดลองหรือห้องปฏิบัติการไม่สามารถนำมาสรุปผลในมนุษย์ได้

ระดับหลักฐาน

หลักฐานจากการศึกษาในห้องปฏิบัติการและสัตว์ทดลอง เป็นรากฐานที่ช่วยให้เข้าใจกลไกและศักยภาพก่อนการศึกษาในมนุษย์ต่อไป

ดูวิธีจัดระดับหลักฐาน
GelatinAnimalsPrinting, Three-DimensionalBioprintingHumansRatsSkin, ArtificialTissue ScaffoldsMesenchymal Stem CellsFishes

ดูงานวิจัยทั้งหมดที่เกี่ยวข้อง

กรองห้องสมุดงานวิจัยด้วยชื่อเรื่อง ชื่อผู้เขียน หรือปีที่ตีพิมพ์ของงานวิจัยนี้

งานวิจัยที่เกี่ยวข้อง