ระดับ D· รากฐานทางวิทยาศาสตร์จากห้องปฏิบัติการและสัตว์ทดลองการศึกษาในสัตว์ทดลองPubMed

3D cell printing of in vitro stabilized skin model and in vivo pre-vascularized skin patch using tissue-specific extracellular matrix bioink: A step towards advanced skin tissue engineering.

Kim BS., Kwon YW., Kong JS., Park GT., Gao G., Han W.

การศึกษาในสัตว์ทดลอง เกี่ยวกับ แผลเรื้อรัง ตีพิมพ์ในวารสาร Biomaterials ปี 2018 — สรุปอัตโนมัติจากบทคัดย่อ PubMed

เปิดรายการอ่านของฉัน
ระดับ D· รากฐานทางวิทยาศาสตร์จากห้องปฏิบัติการและสัตว์ทดลองระดับหลักฐานของงานวิจัยนี้

หลักฐานจากการศึกษาในห้องปฏิบัติการและสัตว์ทดลอง เป็นรากฐานที่ช่วยให้เข้าใจกลไกและศักยภาพก่อนการศึกษาในมนุษย์ต่อไป

  • ระดับ A · หลักฐานทางคลินิกค่อนข้างแข็งแรง
  • ระดับ B · หลักฐานทางคลินิกที่กำลังเติบโตและมีสัญญาณเชิงบวก
  • ระดับ C · งานวิจัยในมนุษย์ระยะต้นที่กำลังสำรวจประโยชน์
  • ระดับ D · รากฐานทางวิทยาศาสตร์จากห้องปฏิบัติการและสัตว์ทดลอง
  • กำลังศึกษาเพิ่มเติม · หัวข้อใหม่ที่นักวิจัยกำลังสำรวจอย่างต่อเนื่อง
อ่านคำอธิบายระดับหลักฐาน A–D

ข้อมูลหน้านี้ดึงมาจากฐานข้อมูล PubMed โดยตรง คำอธิบายภาษาไทยเป็นสรุปอัตโนมัติจากข้อมูลบรรณานุกรมและบทคัดย่อ ไม่ใช่การแปลทั้งฉบับ และไม่ใช่คำแนะนำทางการแพทย์

ประเภทการศึกษา
การศึกษาในสัตว์ทดลอง
วารสาร
Biomaterials (2018)
ประเทศ
Netherlands
จำนวนผู้เข้าร่วม (จากบทคัดย่อ)
—
แหล่งข้อมูล
PubMed
PMID
29614431
DOI
10.1016/j.biomaterials.2018.03.040
จำนวนการอ้างอิง
289

บทคัดย่อ (ต้นฉบับภาษาอังกฤษ)

3D cell-printing technique has been under spotlight as an appealing biofabrication platform due to its ability to precisely pattern living cells in pre-defined spatial locations. In skin tissue engineering, a major remaining challenge is to seek for a suitable source of bioink capable of supporting and stimulating printed cells for tissue development. However, current bioinks for skin printing rely on homogeneous biomaterials, which has several shortcomings such as insufficient mechanical properties and recapitulation of microenvironment. In this study, we investigated the capability of skin-derived extracellular matrix (S-dECM) bioink for 3D cell printing-based skin tissue engineering. S-dECM was for the first time formulated as a printable material and retained the major ECM compositions of skin as well as favorable growth factors and cytokines. This bioink was used to print a full thickness 3D human skin model. The matured 3D cell-printed skin tissue using S-dECM bioink was stabilized with minimal shrinkage, whereas the collagen-based skin tissue was significantly contracted during in vitro tissue culture. This physical stabilization and the tissue-specific microenvironment from our bioink improved epidermal organization, dermal ECM secretion, and barrier function. We further used this bioink to print 3D pre-vascularized skin patch able to promote in vivo wound healing. In v

สิ่งที่งานวิจัยนี้ไม่ได้พิสูจน์

  • • งานวิจัยนี้ไม่ได้พิสูจน์ว่า SVF เป็นการรักษาที่ได้รับการรับรอง หรือใช้แทนการรักษามาตรฐานได้
  • • เป็นการศึกษาก่อนคลินิก ผลในสัตว์ทดลองหรือห้องปฏิบัติการไม่สามารถนำมาสรุปผลในมนุษย์ได้

ระดับหลักฐาน

หลักฐานจากการศึกษาในห้องปฏิบัติการและสัตว์ทดลอง เป็นรากฐานที่ช่วยให้เข้าใจกลไกและศักยภาพก่อนการศึกษาในมนุษย์ต่อไป

ดูวิธีจัดระดับหลักฐาน
AnimalsExtracellular MatrixGuided Tissue RegenerationHumansPrinting, Three-DimensionalSkinSwineTissue EngineeringTransdermal Patch

ดูงานวิจัยทั้งหมดที่เกี่ยวข้อง

กรองห้องสมุดงานวิจัยด้วยชื่อเรื่อง ชื่อผู้เขียน หรือปีที่ตีพิมพ์ของงานวิจัยนี้

งานวิจัยที่เกี่ยวข้อง