Fat Graft Size: Relationship Between Cannula and Needle Diameters

Early human evidence such as case series or small samples is exploring possible benefits.

• Level A · Stronger Clinical Evidence
• Level B · Emerging clinical evidence with positive signals
• Level C · Early human research exploring benefits
• Level D · Scientific groundwork from lab and animal studies
• Emerging · Emerging topic under active research

Abstract (original English)

Background It is generally believed that trauma to fat grafts is detrimental and affects the survival of the graft. In addition, it has been shown that smaller fat particle size corresponds to better survival; however, smaller cannula openings correspond to slower and more difficult fat graft harvesting. Objectives This study documents the relationship between cannula size, harvested fat cell size, and injection needle size. A means of reducing fat particle size following aspiration with larger diameter cannulas is also discussed. Methods Fat was harvested from five patients undergoing elective liposuction. Each fat sample was placed in a syringe and injected through progressively smaller needles until obstruction under low pressure was obtained. The minimal needle size was documented for each sample. Results Fat harvested with a liposuction cannula results in different size fat particles ranging up to the size of the cannula. Particles obtained from 3- and 4-mm cannulas can be injected without obstruction through a 16-gauge needle. Particles obtained from a 2-mm cannula can be injected without obstruction through an 18-gauge needle. Particles obtained from a 1-mm cannula can be injected without obstruction through a 20-gauge needle. Particles obtained from a 1-mm cannula could not be injected without obstruction through a 22-gauge needle. Conclusions There is a relationship be

Evidence level

Early human evidence such as case series or small samples is exploring possible benefits.

Browse all related research

Filter the research library by this study's title keywords, author, or publication year.