ระดับ C· งานวิจัยในมนุษย์ระยะต้นที่กำลังสำรวจประโยชน์การศึกษาไปข้างหน้าPubMed

Innovative Mechanical Processing of Adipose Tissue: A Comparative Evaluation of Microfat and Concentrated Micronized Fat for Superficial Fat Grafting.

Ma X., Dong M., Chen B., Jiang C., Li F.

การศึกษาไปข้างหน้า เกี่ยวกับ การฟื้นฟูผิวหน้า ตีพิมพ์ในวารสาร Aesthetic Plast Surg ปี 2025 — สรุปอัตโนมัติจากบทคัดย่อ PubMed

เปิดรายการอ่านของฉัน
ระดับ C· งานวิจัยในมนุษย์ระยะต้นที่กำลังสำรวจประโยชน์ระดับหลักฐานของงานวิจัยนี้

มีหลักฐานในมนุษย์ระยะต้น เช่น case series หรือกลุ่มตัวอย่างขนาดเล็ก ที่กำลังสำรวจประโยชน์ที่เป็นไปได้

  • ระดับ A · หลักฐานทางคลินิกค่อนข้างแข็งแรง
  • ระดับ B · หลักฐานทางคลินิกที่กำลังเติบโตและมีสัญญาณเชิงบวก
  • ระดับ C · งานวิจัยในมนุษย์ระยะต้นที่กำลังสำรวจประโยชน์
  • ระดับ D · รากฐานทางวิทยาศาสตร์จากห้องปฏิบัติการและสัตว์ทดลอง
  • กำลังศึกษาเพิ่มเติม · หัวข้อใหม่ที่นักวิจัยกำลังสำรวจอย่างต่อเนื่อง
อ่านคำอธิบายระดับหลักฐาน A–D

ข้อมูลหน้านี้ดึงมาจากฐานข้อมูล PubMed โดยตรง คำอธิบายภาษาไทยเป็นสรุปอัตโนมัติจากข้อมูลบรรณานุกรมและบทคัดย่อ ไม่ใช่การแปลทั้งฉบับ และไม่ใช่คำแนะนำทางการแพทย์

ประเภทการศึกษา
การศึกษาไปข้างหน้า
วารสาร
Aesthetic Plast Surg (2025)
ประเทศ
United States
จำนวนผู้เข้าร่วม (จากบทคัดย่อ)
—
แหล่งข้อมูล
PubMed
PMID
39762393
DOI
10.1007/s00266-024-04634-6
จำนวนการอ้างอิง
1

บทคัดย่อ (ต้นฉบับภาษาอังกฤษ)

Background Superficial autologous fat grafting is widely used for facial rejuvenation and regenerative treatments, yet its retention rate remains unpredictable. Enhancing the concentration of adipose-derived stem cells (ASCs) has been shown to improve graft retention. Mechanical fat processing techniques can reduce fat granules size for superficial injection as well as elevate the concentration of ASCs. Objectives We introduced a novel mechanical fat processing method to convert macrofat into concentrated micronized fat (CMF), which can generate small fat particles and increase the concentration of ASCs. The microstructure, cell composition, and in vivo evaluation of microfat and CMF were compared. Methods Adipose tissue was harvested from patients undergoing liposuction. Microfat was obtained using a multiperforated cannula with multiple 1.0-mm smooth side holes, while CMF was prepared with a spinning sharp blade to create smaller particles. Cell counting, viability assays, flow cytometry, ELISA, and in vivo studies were conducted to evaluate the processed fat. Results Both CMF and microfat were suitable for superficial fat grafting with 26-gauge needles. Scanning electron microscopy and whole-mounting stain showed that the CMF maintained an integral histological structure. Cell count and flow cytometry tests revealed that the number of ASCs increased significantly in the CMF

สิ่งที่งานวิจัยนี้ไม่ได้พิสูจน์

  • • งานวิจัยนี้ไม่ได้พิสูจน์ว่า SVF เป็นการรักษาที่ได้รับการรับรอง หรือใช้แทนการรักษามาตรฐานได้

ระดับหลักฐาน

มีหลักฐานในมนุษย์ระยะต้น เช่น case series หรือกลุ่มตัวอย่างขนาดเล็ก ที่กำลังสำรวจประโยชน์ที่เป็นไปได้

ดูวิธีจัดระดับหลักฐาน
HumansFemaleAdipose TissueLipectomyAdultMiddle AgedGraft SurvivalTransplantation, AutologousTissue and Organ HarvestingSubcutaneous Fat

ดูงานวิจัยทั้งหมดที่เกี่ยวข้อง

กรองห้องสมุดงานวิจัยด้วยชื่อเรื่อง ชื่อผู้เขียน หรือปีที่ตีพิมพ์ของงานวิจัยนี้

งานวิจัยที่เกี่ยวข้อง