ระดับ D· รากฐานทางวิทยาศาสตร์จากห้องปฏิบัติการและสัตว์ทดลองการศึกษาในสัตว์ทดลองPubMed

A Microfluidic Device to Fabricate One-Step Cell Bead-Laden Hydrogel Struts for Tissue Engineering.

Kim J., Lee H., Jin EJ., Jo Y., Kang BE., Ryu D.

การศึกษาในสัตว์ทดลอง เกี่ยวกับ สะโพก ตีพิมพ์ในวารสาร Small ปี 2021 — สรุปอัตโนมัติจากบทคัดย่อ PubMed

เปิดรายการอ่านของฉัน
ระดับ D· รากฐานทางวิทยาศาสตร์จากห้องปฏิบัติการและสัตว์ทดลองระดับหลักฐานของงานวิจัยนี้

หลักฐานจากการศึกษาในห้องปฏิบัติการและสัตว์ทดลอง เป็นรากฐานที่ช่วยให้เข้าใจกลไกและศักยภาพก่อนการศึกษาในมนุษย์ต่อไป

  • ระดับ A · หลักฐานทางคลินิกค่อนข้างแข็งแรง
  • ระดับ B · หลักฐานทางคลินิกที่กำลังเติบโตและมีสัญญาณเชิงบวก
  • ระดับ C · งานวิจัยในมนุษย์ระยะต้นที่กำลังสำรวจประโยชน์
  • ระดับ D · รากฐานทางวิทยาศาสตร์จากห้องปฏิบัติการและสัตว์ทดลอง
  • กำลังศึกษาเพิ่มเติม · หัวข้อใหม่ที่นักวิจัยกำลังสำรวจอย่างต่อเนื่อง
อ่านคำอธิบายระดับหลักฐาน A–D

ข้อมูลหน้านี้ดึงมาจากฐานข้อมูล PubMed โดยตรง คำอธิบายภาษาไทยเป็นสรุปอัตโนมัติจากข้อมูลบรรณานุกรมและบทคัดย่อ ไม่ใช่การแปลทั้งฉบับ และไม่ใช่คำแนะนำทางการแพทย์

ประเภทการศึกษา
การศึกษาในสัตว์ทดลอง
วารสาร
Small (2021)
ประเทศ
Germany
จำนวนผู้เข้าร่วม (จากบทคัดย่อ)
—
แหล่งข้อมูล
PubMed
PMID
34854561
DOI
10.1002/smll.202106487
จำนวนการอ้างอิง
28

บทคัดย่อ (ต้นฉบับภาษาอังกฤษ)

Cell-laden structures are widely applied for a variety of tissue engineering applications, including tissue restoration. Cell-to-cell interactions in bioprinted structures are important for successful tissue restoration, because cell-cell signaling pathways can regulate tissue development and stem cell fate. However, the low degree of cell-cell interaction in conventional cell-laden bioprinted structures is challenging for the therapeutic application of this modality. Herein, a microfluidic device with cell-laden methacrylated gelatin (GelMa) bioink and alginate as a matrix hydrogel is used to fabricate a functional hybrid structure laden with cell-aggregated microbeads. This approach effectively increases the degree of cell-to-cell interaction to a level comparable to cell spheroids. The hybrid structure is obtained using a one-step process without the exhausting procedure. It consists of cell bead fabrication and an extrusion process for the cell-bead laden structure. Different flow rates are appropriately selected to develop cell-laden struts with homogeneously distributed cell beads for each hydrogel in the process. The hybrid struts exhibit significantly higher cellular activities than those of conventional alginate/GelMa struts, which are bioprinted using similar cell densities and bioink formulations. Furthermore, hybrid struts with adipose stem cells are implanted into

สิ่งที่งานวิจัยนี้ไม่ได้พิสูจน์

  • • งานวิจัยนี้ไม่ได้พิสูจน์ว่า SVF เป็นการรักษาที่ได้รับการรับรอง หรือใช้แทนการรักษามาตรฐานได้
  • • เป็นการศึกษาก่อนคลินิก ผลในสัตว์ทดลองหรือห้องปฏิบัติการไม่สามารถนำมาสรุปผลในมนุษย์ได้

ระดับหลักฐาน

หลักฐานจากการศึกษาในห้องปฏิบัติการและสัตว์ทดลอง เป็นรากฐานที่ช่วยให้เข้าใจกลไกและศักยภาพก่อนการศึกษาในมนุษย์ต่อไป

ดูวิธีจัดระดับหลักฐาน
AlginatesAnimalsHydrogelsLab-On-A-Chip DevicesMicePrinting, Three-DimensionalTissue EngineeringTissue Scaffolds

ดูงานวิจัยทั้งหมดที่เกี่ยวข้อง

กรองห้องสมุดงานวิจัยด้วยชื่อเรื่อง ชื่อผู้เขียน หรือปีที่ตีพิมพ์ของงานวิจัยนี้

งานวิจัยที่เกี่ยวข้อง